General Electric | SGHA26AT4400C | Circuit Breaker | 26A | 2-Pole | 600V

General Electric SGHA26AT4400C circuit breaker is built for dependable overcurrent protection in demanding electrical environments. With a 26-amp rating across two poles and a 600-volt capacity, this GE part is designed for maintenance, retrofit, and replacement tasks where exact specifications matter. If you’re upgrading an aging panel or restoring a critical circuit, this breaker delivers consistent performance that you can count on. Key specifications at a glance - Amperage: 26A - Poles: 2-Pole - Voltage: 600V - Part reference: SGHA26AT4400C (the best compatibility reference) Why this GE breaker stands out - Exact-match compatibility: The SGHA26AT4400C is a purpose-built GE component, making it a reliable choice when aligning with GE panels and enclosures. Matching the exact part number minimizes compatibility surprises and ensures the protective device fits correctly in your panel. - Two-pole protection for balanced circuits: By simultaneously disconnecting both live conductors, this breaker protects multi-wire and 240V circuits with coordinated disconnection, reducing risk of backfeed and equipment damage. - Clear, verifiable ratings: With a dedicated 26A rating and a 600V maximum, you can select this breaker for circuits that require specific current trip characteristics and high-voltage handling, helping to maintain system stability and safety. Ideal use cases - Replacement in aging or failed GE panels where the SGHA26AT4400C matches the existing protective device. - Retrofit projects that require maintaining identical amperage, pole count, and voltage ratings to preserve panel labeling and trip characteristics. - Commercial and light industrial electrical installations where reliable two-pole protection is necessary for shared neutrals or two-hot-leg circuits. What problems it solves - Reduces downtime by providing a direct-fit, known-spec replacement that minimizes compatibility risk. - Helps prevent overcurrent damage to wiring and connected equipment by delivering precise 26A protection on both hot legs. - Supports safe, code-compliant isolation of circuits in 600V-rated systems with reliable, coordinated trip. How to verify fit and readiness - Confirm that your panel or load center accepts a two-pole, 26A, 600V GE breaker and that the part number SGHA26AT4400C matches your existing components. - Before ordering, compare the current breaker you’re replacing to the SGHA26AT4400C: two-pole configuration, 26A rating, and 600V rating should align exactly. - Ensure the installation environment matches the intended application (industrial/commercial setting) and that any required commissioning steps for a GE breaker are followed. Practical installation considerations - Handle with the power off and verify no voltage presence before removal or installation. - When tightening terminals, follow the panel manufacturer’s torque specifications to avoid terminal damage or arcing. - After installation, perform a functional test to confirm proper trip operation and mechanical fit within the bus bar and mounting frame. In short, the General Electric SGHA26AT4400C is a precise, purpose-built replacement that aligns with GE panels and 600V circuits. Its 26A, 2-pole configuration provides coordinated protection for critical loads, making it a valuable choice for maintenance, retrofit, and replacement projects where exact specs matter. Using the part number SGHA26AT4400C as your compatibility reference helps ensure a seamless fit and reliable protection across your electrical system.