0911-25-1P | Circuit Breaker | 25A | 1-Pole

The 0911-25-1P is a 25A, 1-Pole industrial circuit breaker built for reliable protection in maintenance, retrofit, and replacement projects. Identified by the exact part number 0911-25-1P, this unit is designed to drop into panels that require precise compatibility—making it the practical choice when you need a one-to-one replacement or a targeted upgrade.

Key specifications

• Amperage: 25A
• Poles: 1-Pole
• Part number: 0911-25-1P

Why this 0911-25-1P stands out

When your goal is a seamless fit and dependable circuit protection, the part number becomes your most reliable reference. The 0911-25-1P is purpose-built for environments where precise spec matching matters, reducing the risk of incompatibility during maintenance or retrofits. Its 1-pole design is ideal for protecting a single circuit, while the 25A rating provides appropriate protection for typical lighting, receptacle, or small machinery circuits in industrial settings.

Best use cases

• Replacing a failed or aging breaker in an industrial panel with an exact 25A, 1-Pole unit.
• Retrofits where a 25A single-circuit protection is required to meet updated wiring or load calculations.
• Maintenance planning to keep panel configurations aligned with documented specifications and part numbers.

Compatibility and fit

Before ordering, verify that the application requires a 25A, 1-Pole breaker and that the panel accepts the 0911-25-1P form factor. The part number is the best reference for compatibility, ensuring correct mounting, electrical characteristics, and fit within the panel’s design. If your setup relies on specific trip characteristics or labeling, confirm those requirements align with the existing equipment and safety standards.

Installation considerations and best practices

• Power down the panel and follow all local electrical codes and lockout/tagout procedures before replacement.
• Remove the old breaker and inspect the bus bar and mounting points for any wear or debris.
• Install the 0911-25-1P securely, ensuring proper seating in the bus and a firm, flush fit in the panel enclosure.
• After installation, restore power and test the circuit to confirm reliable operation and correct tripping behavior under fault conditions.